| Velcro position in the boat: |
 |
| Below the right velcro there is some foam so the cells are above
the aluminium drive tube to prevent it from damage when cells are
bouncing. |
Finished boat.
For competition I have yet to install emergency switch and holders
for starting number plate. |
 |
 |
Props:
From left to right: Modified Garupner K29 (28 mm diameter), normal
K29, modified Octura X427 and normal X427. |
 |
| Modified K29 worked for me as it has less pitch than X427. Just
sharpen the leading edge and after some x acto action . Since the
load on the prop is small there shouldn't be much difference between
metal and carbon reinforced plastic prop not to mention that plastic
costs less. |
| Small birdy waiting on the pit suitcase on our first cup race.
It was freezing cold! |
 |
Thank You Miha!
I would like to personally thank Miha for all of his hard work,
and for sharing it with us here at MicroHydros.com
- Trent |
|
