| Cells À soldered inline 2 by 2 and shrinkwraped and inline 3 and
shrinkwraped. Between 2 and 2 there is thin teflon coated nylon
cloth sheet to prevent shorcuts (hard to get À try in homestores,
that's where I bought it). If not you can go with thin teflon sheets
or even try plumbers teflon tape. Kontronik sells ŽGoldfixâ tape
which is also good. What is not visible is the velcro on the other
side of the pack. Connectors are MC 2 mm gold plated and wires are
16 gauge from Novak. From the photos above you can see I stuck some
foam between the velcroed cells to prevent them from moving side
to side. |
